Bearing Size Chart

Code	Bearing Type	Bearing Cone	Bearing Cup	ID mm	OD mm	Width mm
H4820	Taper Roller Bearing Cup/Cone set	67048	67010	31.75	59.131	15.875
H4822	Taper Roller Bearing Cup/Cone set	11949	11910	19.05	45.237	15.494
H4830	Taper Roller Bearing Cup/Cone set	68149	68110	35	59.131	15.875
H4832	Taper Roller Bearing Cup/Cone set	12749	12710	22	45.237	15.494
H4835	Sealed Ball Bearing	62052RS	N/A	25	52	15
H4840	Taper Roller Bearing Cup/Cone set	44642	44610	25.4	50.292	14.224
H4841	Taper Roller Bearing Cup/Cone/ Seal set	44600LC	44610	25.4	50.292	14.224*
H4842	Taper Roller Bearing Cup/Cone set	30205	30205	25	52	16.25
H4843	Taper Roller Bearing Cup/Cone set	30204	30204	20	47	15.25
H4844	Taper Roller Bearing Cup/Cone set	30206	30206	30	62	17.25
H4845	Taper Roller Bearing Cup/Cone set	48548	48510	34.925	65.088	18.034
H4846	Taper Roller Bearing Cup/Cone set	44649	44610	26.988	50.292	14.224
H4847	Taper Roller Bearing Cup/Cone set	11749	11710	17.462	39.878	13.843
H4848	Taper Roller Bearing Cup/Cone/ Seal set	67048LA	67010	31.75	59.131	15.875*
H4850	Taper Roller Bearing Cup/Cone set	25580	25520	44.45	82.931	23.812
H4851	Taper Roller Bearing Cup/Cone set	15123	15145	31.75	62	18.161

All measurements given are approximates and may vary. Trailparts accepts no liability for work conducted based on the dimensions above.
Excludes seal width

Return

Ken and I would like to sincerely thank you for your wonderful customer service and the way your company handled our issues with the boat trailer. We have never been treated so nicely over an issue before. Your politeness, motivation and just a great attitude made this very stressful situation a lot more pleasant for us.
Be proud of your customer service manner, a rare find and we are stoked to have this huge problem sorted. We tested it out at the weekend by traveling to Motueka, a 5-hour drive from Christchurch, the trailer towed beautifully.

You are awesome and we will make sure we pass on to others how wonderful your company is to deal with.
.

Ken & Lynn | GFAB Trailer
We have been working with Trailparts for years now and are very satisfied with their products - The all team is very professional and friendly. We mainly deal with Craig and have to say that he is on point! Highly recommended.

Jonathan | Aakron Xpress Ltd
Awesome thank you very much. I have to say you guys really do stand by your promise to give customers excellent service and would say your service is out standing.

Leon | Hireace
Thankyou again for your fantastic service and support. Despite the issue with the Calipers, the Disk hubs and bearings were all sweet.
She is all on the road and working. We got away all AOK in the end and would have no hesitation in recommending you to others we associate with.
Kind regards
Phil

Phil
Now 100000km isn’t a lot in a commercial sense I guess….. however …we would have replaced 4 maybe 5 sets of our little wheel and tyre packages in that mileage normally… So a massive saving. The unihubs are without question the best thing on the market !

Matthew | ASAP Cars
Prompt turnaround on that custom axle, just in time for final assembly in preparation for the Fieldays. Thanks to the Trailparts Team for going the extra mile. Always appreciate your prompt service and support.

Rob Hogan | Kea Trailers NZ Ltd
Thanks again to you and the team for sorting these axles for us at short notice, 110% appreciated! They're now fully installed to the float & we'll be rolling it in a matter of minutes. Fantastic!

Justin | Angove Engineering
This company has two of the best people employed that I have dealt with in a very long time. Dealing with them was so easy!

E. Hammerich
We want to be associated with businesses like you who understand what's required to make things easy for the average customer.

A. Guzzo