Torque Guide & Settings

Coupling Mount Torque Settings

Coupling Bolt Size G 8.8 G 10.9
Non Braked M10 45ft/lb 60Nm 60ft/lb 80Nm
Braked M12 75ft/lb 100Nm 90ft/lb 120Nm

Note: Nylon insert nuts must have a minimum of THREE threads exposed past the nut when fully threaded.


Axle Component Torque Settings

Component ft/lb Nm
Wheel Nut - 7/16" 80ft/lb 110Nm
Wheel Nut - 1/2" 90ft/lb 120Nm
Brake Caliper 90ft/lb 120Nm
Brake Rotor 40ft/lb 55Nm
U Bolt - M12 40ft/lb 55Nm
U Bolt - M16 80ft/lb 110Nm
Unihub - Stake Nut 205ft/lb 280Nm
Hub Castle Nut The nut should be tightened until snug, with no side-to-side play in the hub, then backed off slightly, about 1/4 of a turn.